Sorry, you need to enable JavaScript to visit this website.

Hydrogen and deuterium permeation measurements on the double-wall tubes material for the water-cooled Pb-17Li DEMO blanket

TitoloHydrogen and deuterium permeation measurements on the double-wall tubes material for the water-cooled Pb-17Li DEMO blanket
Tipo di pubblicazioneArticolo su Rivista peer-reviewed
Anno di Pubblicazione2000
AutoriSerra, Emanuele, Rigal E., and Benamati G.
RivistaFusion Engineering and Design
Volume49-50
Paginazione675-679
ISSN09203796
Parole chiaveBreeding blankets, Characterization, deuterium, Double wall tubes (DWT), Hydrogen, Mechanical permeability, Mechanical testing, Microhardness, Optical microscopy, Pressure effects, Scanning electron microscopy, Tubes (components), Water cooled reactors
Abstract

The aim of this study to measure the hydrogen/deuterium transport and inventory parameters in the double-wall tubes (DWT) material for the water-cooled Pb-17Li DEMO blanket. Measurements are conducted using a time dependent permeation method over the temperature range 473-723 K, with hydrogen and deuterium driving pressures in the range 1-105 Pa (0.01-1000 mbar). The samples are also characterized using optical microscopy, SEM, microhardness measurements and mechanical tests. An effective permeability of about 12 times lower than 2.1 mm of bare F82H steel at 573 K and three times lower than 2.1 mm of bare F82H steel at 723 K have been measured. This result is close to the theoretical prevision (multi-layer model).

Note

cited By 6; Conference of 5th International Symposium on Fusion Nuclear Technology ; Conference Date: 19 September 2000 Through 24 September 2000; Conference Code:57817

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-0034316668&doi=10.1016%2fS0920-3796%2800%2900364-1&partnerID=40&md5=acef003a08f1d69732ee931def56ae68
DOI10.1016/S0920-3796(00)00364-1
Citation KeySerra2000675