| Titolo | Hydrogen and deuterium transport and inventory parameters through W and W-alloys for fusion reactor applications |
|---|---|
| Tipo di pubblicazione | Articolo su Rivista peer-reviewed |
| Anno di Pubblicazione | 2000 |
| Autori | Benamati, G., Serra Emanuele, and Wu C.H. |
| Rivista | Journal of Nuclear Materials |
| Volume | 283-287 |
| Paginazione | 1033-1037 |
| ISSN | 00223115 |
| Abstract | The aim of this work is to measure the hydrogen/deuterium transport and inventory parameters in relevant structural and/or armour materials for the International Thermonuclear Experimental Reactor (ITER) divertor such as W and W-alloys. The W-alloys: W, W + 1% La2O3 and W + 5% Re have been investigated. The materials were supplied from the Metallwerk Plansee GmbH (Austria). Measurements were conducted using a time-dependent permeation method over the temperature range 673-873 K with hydrogen and deuterium pressures in the range 10-100 kPa (100-1000 mbar). The samples were also characterized using optical microscopy, SEM and energy dispersive spectroscopy (EDS) in order to investigate the composition, microstructure and morphology of the surfaces and cross-sections through the samples. © 2000 Elsevier Science B.V. All rights reserved. |
| Note | cited By 39 |
| URL | https://www.scopus.com/inward/record.uri?eid=2-s2.0-4244044956&doi=10.1016%2fS0022-3115%2800%2900202-6&partnerID=40&md5=2027b9b31ca052a18fb6352bc1a53491 |
| DOI | 10.1016/S0022-3115(00)00202-6 |
| Citation Key | Benamati20001033 |
