Sorry, you need to enable JavaScript to visit this website.

Properties of ZrNx films with x > 1 deposited by reactive radiofrequency magnetron sputtering

TitoloProperties of ZrNx films with x > 1 deposited by reactive radiofrequency magnetron sputtering
Tipo di pubblicazioneArticolo su Rivista peer-reviewed
Anno di Pubblicazione2006
AutoriRizzo, Antonella, Signore M.A., Mirenghi L., and Serra Emanuele
RivistaThin Solid Films
Volume515
Paginazione1307-1313
Parole chiaveDeposition, Magnetron sputtering, Nitrogen partial pressure, Optical analysis, Optical films, Optical properties, Reactive radiofrequency magnetron sputtering, Scanning electron microscopy, Stoichiometry, Surface phenomena, X ray photoelectron spectroscopy, Zirconium compounds, Zirconium nitride
Abstract

Thin ZrNx films have been prepared by reactive radiofrequency magnetron sputtering varying the nitrogen partial pressure in the range 0-3.26 Pa. The films have been analyzed by X-ray photoelectron spectroscopy (XPS) and by optical characterization in the UV-Vis-IR range. The cross-section and surface morphology of the samples were examined by means of field emission gun-scanning electron microscopy. The effects of the nitrogen partial pressure on the ZrNx films stoichiometry have been studied correlating the N 1s photoelectron peaks with different bounding states for the zirconium nitride. The XPS depth profile analysis has revealed the presence of metastable phases (ZrN2, Zr3N4) that vanishes when lowering the nitrogen partial pressure. The optical analysis has permitted to distinguish two different behaviours of the deposited samples in the visible range: semi-transparent and absorbent. Drude-Lorentz model fitted the behaviour of absorbent films, while the O'Leary model was applied to the semi-transparent ones. The semi-transparent films had a band gap varying between 2.36 and 2.42 eV, typical values of N-rich zirconium nitride films. Morphological analysis showed a compact and dense columnar structure for all the samples. A simple growth model explains the presence of the different nitride phases considering implantation and re-sputtering effects. © 2006 Elsevier B.V. All rights reserved.

Note

cited By 24

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-33751211870&doi=10.1016%2fj.tsf.2006.03.020&partnerID=40&md5=bec5cb536771f4410cc1cc3d7554cddf
DOI10.1016/j.tsf.2006.03.020
Citation KeyRizzo20061307