Sorry, you need to enable JavaScript to visit this website.

Acoustic emission monitoring of chemically bonded anchors

TitoloAcoustic emission monitoring of chemically bonded anchors
Tipo di pubblicazioneArticolo su Rivista peer-reviewed
Anno di Pubblicazione2010
AutoriRizzo, P., Spada A., Degala S., and Giambanco G.
RivistaJournal of Nondestructive Evaluation
Volume29
Paginazione49-61
ISSN01959298
Parole chiaveAcoustic emission testing, Acoustic emissions, acoustics, Anchor rod, Anchors, Intensity analysis, Moment tensors, Parameter analysis, Polyester resins, Pull-out test, Pullout tests, Resins, Structural analysis, Tensors
Abstract

This paper presents a study on the use of acoustic emission (AE) to assess the structural soundness of concrete reinforced with chemically bonded anchors. The results of an experimental work based on six pullout tests monitored using an AE instrumentation suite are reported below. In every test one rebar was embedded in the hardened concrete by means of polyester resin. The AE was adopted to monitor the onset and progression of any structural damage. The parametric analysis, the intensity analysis and the moment tensor analysis of AE data were used to discriminate among different sources of damage. The technique shows promise for field application and may contribute to fully understand the structural mechanism in the rebar/adhesive/concrete systems. © 2010 Springer Science+Business Media, LLC.

Note

cited By 14

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-77649232210&doi=10.1007%2fs10921-010-0065-5&partnerID=40&md5=f9e1fa512a4e7a02a5ebbd1f0337cf9e
DOI10.1007/s10921-010-0065-5
Citation KeyRizzo201049