Sorry, you need to enable JavaScript to visit this website.

SAW chemical sensing using poly-ynes and organometallic polymer films

TitoloSAW chemical sensing using poly-ynes and organometallic polymer films
Tipo di pubblicazioneArticolo su Rivista peer-reviewed
Anno di Pubblicazione2001
AutoriPenza, Michele, Cassano Gennaro, Sergi A., C. Sterzo Lo, and Russo M.V
RivistaSensors and Actuators, B: Chemical
Volume81
Paginazione88-98
ISSN09254005
Parole chiaveAcoustic arrays, Acoustic surface wave devices, Atmospheric humidity, Chemical sensors, Hygrometers, Metallorganic polymers, Pattern Recognition, Plastic films, Polymer films, Polymeric membranes, Principal component analysis, Resonators, Sensitivity analysis, Surface acoustic waves (SAW)
Abstract

We have investigated chemical sensing properties of three polymeric films (organic and organometallic poly-ynes) by a surface acoustic wave (SAW) and surface transverse wave (STW) sensor, at room temperature. The sensor system, consisting of an acoustic two-port resonator operating at 433.92 and 380.8MHz, respectively, has been configured as a frequency oscillator, including an integrated electronic module. The polymeric membranes have been tested, at room temperature, toward gases (NO2, NO, NH3, CO, CH4, SO2, H2S in N2), relative humidity (RH), and vapours (ethanol, acetone, ethyl-acetate) by showing high sensitivity and low selectivity. A comparison of sensing performance of our SAW RH sensors with a commercial hygrometer has been realised. Principal component analysis (PCA) has been applied as pattern recognition technique achieving good separation for the examined vapours, at tested low concentrations. © 2001 Elsevier Science B.V. All rights reserved.

Note

cited By 51

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-0035892601&doi=10.1016%2fS0925-4005%2801%2900937-6&partnerID=40&md5=39596917ba4bad7e131e48dcb275427a
DOI10.1016/S0925-4005(01)00937-6
Citation KeyPenza200188