| Title | Investigation on the suitability of plasma sprayed Fe-Cr-Al coatings as tritium permeation barrier |
|---|---|
| Publication Type | Articolo su Rivista peer-reviewed |
| Year of Publication | 1999 |
| Authors | Fazio, C., Stein-Fechner K., Serra Emanuele, Glasbrenner H., and Benamati G. |
| Journal | Journal of Nuclear Materials |
| Volume | 273 |
| Pagination | 233-238 |
| ISSN | 00223115 |
| Keywords | Air plasma spray, Coatings, Deposition, Ferritic martensitic steel, High velocity oxy fuel, Hydrogen, Hydrogen isotope permeation measurements, Iron powder, Isotopes, Plasma spraying, Steel, Substrates, Temperature, Tritium permeation barrier, Vacuum plasma spray |
| Abstract | Results on the fabrication of a tritium permeation barrier by spraying Fe-Cr-Al powders are described. The sprayed coatings were deposited at temperatures below the Acl temperature of the ferritic-martensitic steel substrate and no post-deposition heat treatment was applied. The aim of the investigation was the determination of the efficiency of the coatings to act as tritium permeation barrier. Metallurgical investigations as well as hydrogen isotope permeation measurements were carried out onto the produced coatings. The depositions were performed on ferritic-martensitic steels by means of three types of spray techniques: high velocity oxy fuel, air plasma spray and vacuum plasma spray. |
| Notes | cited By 16 |
| URL | https://www.scopus.com/inward/record.uri?eid=2-s2.0-0032677180&doi=10.1016%2fS0022-3115%2899%2900059-8&partnerID=40&md5=75853fa22ee1a3dd1832dc7a392d91f7 |
| DOI | 10.1016/S0022-3115(99)00059-8 |
| Citation Key | Fazio1999233 |
