| Title | Anaerobic dynamic membrane bioreactor for wastewater treatment at ambient temperature |
|---|---|
| Publication Type | Articolo su Rivista peer-reviewed |
| Year of Publication | 2016 |
| Authors | Alibardi, L., Bernava N., Cossu R., and Spagni A. |
| Journal | Chemical Engineering Journal |
| Volume | 284 |
| Pagination | 130-138 |
| ISSN | 13858947 |
| Keywords | Anaerobic process, Bioconversion, Bioreactors, Dynamic membrane bioreactors, Dynamic membranes, Effluents, Energy utilization, filtration, Hydraulic retention time, Membrane bioreactor, Membranes, Mesh filtration, Mesh generation, Microfiltration, Municipal wastewaters, Pore size, Reduce energy consumption, Removal, Temperature, Wastewater treatment |
| Abstract | A bench-scale dynamic membrane (DM) bioreactor was operated to evaluate the anaerobic treatment of a synthetic municipal wastewater at ambient temperature. The DM was developed over a large pore size (200μm) mesh in order to improve sludge filterability and reduce energy consumption. The system achieved average organic removals higher than 80% and 90% for total COD and filtered COD, respectively. Results also demonstrated that the biofilm, which the DM is made of, played a significant part in obtaining the overall organic removal efficiency. The large pore size of the mesh allowed for high membrane fluxes (approximately 15-20Lm-2h-1) applying low TMP (usually lower than 50-100mbar). Fluxes higher than 20Lm-2h-1 produced low solid removal efficiency indicating deterioration of the DM. COD mass balance suggests that the low hydraulic retention times applied to the system caused methane loss through the effluent due to oversaturation. © 2015 Elsevier B.V. |
| Notes | cited By 7 |
| URL | https://www.scopus.com/inward/record.uri?eid=2-s2.0-84941696109&doi=10.1016%2fj.cej.2015.08.111&partnerID=40&md5=01e16d4f7048438856c94e8216ba9a47 |
| DOI | 10.1016/j.cej.2015.08.111 |
| Citation Key | Alibardi2016130 |
